Creating items for the Paradox 1915 Production

DIY

Within our task I had to create various items,That we will use within out Paradox production.

How I created my Own Steam Punk Inspired Gun 

Stage 1: within this stage I had to bring in a large plastic bottle which will now become the barrel/base of my steam punk inspired gun . 

Stage 2: I then had to use a Stanley knife to cut around the top of the bottle removing the top half so it would be easy to attach a plastic tube to make it look more like a gun. 

Stage 3: Once all the items are intact I then was underway spray painting the base. 

Stage 4: 

 

As you can see within this image I needed to following items to create the steam punk aspects of my gun, 

Here are some images spanning different angels etc .

Once I reached this stage and the gun was secured with Gaffer tape , as the items used was heavier than the plastic base  this was the best option to secure it for the time being. 

Stage 5 : Was to Place Plaster/Paper Mashe over the complete model clearing all the Black Gaffer tape for spray Painting but only covering the gaffer so it all stays in tack and strong .

Above Image : Showing the front on view of the gun covered in Plaster. (C) 

Above Image : Showing the Base of the gun with some Rubber tubing arising from the barrel this will soon be a steam Powered Gun with a Stream Punk Clock Added to the end of the tubing. I will also be adding some bolts and pins near to the end of this project which will be added at a later date . 

Above Image : Is of the gun completed in Plaster from the Back showing the entire model as it stands today. The next stages will be to Spray Paint and add items to this gun Model.